Starlink Gen 3 Standard “Kickstand” Dish Pole Mount Adapter for HF 20FT Telescoping Flagpole

You still need to purchase the Starlink pole adapter in addition to my adapter.

The 3rd generation Starlink Gen 3 Standard “Kickstand” Dish has a completely new mounting bracket. This dish is not actuated and does not move. It has a snap in bracket that allows different mounting options.

The pole adapter that is sold with this dish, seems to be designed for poles that are thick-walled or rigid. The harbor freight pole is a very thin walled pipe. Attempting to use this pole adapter with the harbor freight flagpole will almost certainly end up with your dish on the ground. The mounting plate is very shallow, there is only a single bolt that is used as you will see in the photos. The pole bends almost immediately when trying to tighten the bolt to any reasonable measure. If any kind of wind gets underneath the dish it can also be easily pushed straight off the pole.

My adapter locks both the pole and the pole mount together using the existing bolts and screws, making for an extremely secure and stable platform. No other parts are needed besides what comes with the flagpole and the Starlink pole adapter. A link to photos and step-by-step directions will be included.

Confirmed to fit HF item 64344 or 64342

Made from Polyethylene Terephthalate Glycol, which is a UV resistant, Chemical resistant, very strong engineering plastic.

Oh yeah, we also ran it over with the tractor again, 4000 pounds and still no damage.

NEED a Custom size??, due to this design, we can fit almost ANY pole. Message me lets get one made (custom orders have additional cost)